[ We ] "Love Eck®. It's better and faster than using Mylar tape. Eck® saves us time and money "
"Galvanic corrosion between Beryllium copper and aluminum has plagued our industry for years. we have been using your Eck® product in our Beryllium copper corrosion applications with continued success. We are grateful to have found a product that addresses this issue, slowing if not eliminating it's effects."
"Eck® attacks problems" As a result of our research, we have started using Eck® any place hardware is attached. Primarily it seals out moisture that can be trapped between the mounted hardware and it acts as a barrier between dissimilar metals."
"Based on (our) data, Eck® corrosion protection coating will be applied to the welded areas of each prop shaft."
"After 1000 hours of exposure, the panel was taken out of the test chamber and examined. The door showed no signs of corrosion where the Eck® had been used for protection."
"Tests (ASTM G85-A5 prohesion and ASTM B117 salt spray) have shown that the use of Eck® will significantly delay or eliminate crevice corrosion failures as well as delay the onset of corrosion when used to isolate dissimilar metals."
"Have never experienced a single problem with corrosion, oxidation from dissimilar metals."
"It is without reservation that we endorse Eck®. Since we implemented Eck® into our manufacturing operation, we have not had any return of corrosion."
"This (electrolic corrosion) has been the nemesis of our industry for years. We're pretty happy with it (Eck®) so far."
"We have painted hundreds of fire trucks and ambulances and have never had a warranty claim for corrosion because we use Eck®."